KRUMAN CHS 6016 – CNC HYDRAULIC GUILLOTINE SHEARING MACHINE

Function:

Maximum cutting thickness: 16 mm
Maximum cutting length: 6300 mm
Tempered steel plates: 450 N/mm2
Dispatch distance: 20 ~ 1000 mm
Cutting angle: 0 ~ 2.5
Throat depth: 100mm
Intensity of cutting stroke: 5 times/minute
Knife length: 6450 mm
Distance between axes: 6690mm
Oil pump: + Flow: 120L/p
Main motor power: 37 kW
Power supply: 3 phase, 380V/50Hz
Weight: approximate weight is 42000 kg
Machine size: 7750X2600X3150 mm
Controller: Mitsubishi Touch Screen System
Knife material: D2

KRUMAN 2.5M CLS 2525 NC – CNC HYDRAULIC GUILLOTINE SHEARING MACHINE

Function:

Cutting thickness: 25mm
Cutting length: 2500mm
Tempered steel plate: 450N/mm2
Back gauge distance: 20-600 mm
Cutting angle: 0.5-3 degrees
(Automatic adjustment by the button)
Journey: 5-12 min-1
Engine power: 37 Kw
Blade length: 2550mm
Hydraulic pump: 251/min
Throat depth: 150mm
Machine size (mm) (LxWxH): 3200x2150x2300
Power supply: 3 phase, 380V, 50 Hz

BMC-4000/CNC CUTTING MACHINE BRUCO BLC SERIES BMC-4000

Function:

Plasma cutting machine Model:
BMC-4000/
CNC cutting machine Bruco BLC series 3000/4000
Gauge width: 4000 x 16000 mm
Effective cutting width: 3000*14000 mm
Unstable speed: 0-12000 mm/minute
Cutting speed:
+ Plasma: Depends on the cutting source
+ Flame: 100-1000 mm/min
Maximum cutting thickness:
+ Plasma: Depends on the cutting source
+ Flame: 6-150 mm
Distance to adjust the height of the cutting
torch: 200mm
Power voltage: 1 phase 220V/50Hz

TPD SERIES CNC PLATE DRILLING MACHINE

Function:

Maximum workpiece size (LxW): 2000x1600mm
Thickness of workpiece: 5-100mm
Working height: 800mm
Drill table type, Servo control
Clamp type 12 hydraulic clamps
Number of drills 1
Maximum drilling diameter: Φ50mm
Main motor power: 5.5kW
Speed: 120 ~ 560r/min
Journey of the vertical axis (Z axis) 350mm
X axis motor power of 1.3 kW
Y axis motor power of 1,3 kW
Z axis motor power of 0.85 kW
Scrap motor load capacity: 0.4 kW
Motor cooling system power: 0.42kW
Hydraulic station power: 2.2kW
Total capacity: ~ 12kW
Electrical control type: MISTUBISHI PLC
Number of CNC spindles: 3
Size: 3990X2352X 2780mm
Weight: About 7 tons

DOUBLE HEAD STEEL PLATE BEVELING MACHINE: XBJ-6 SERIES

Function:

Maximum sheet length: 6000mm
Plate thickness: 6-50mm
Plate width: 300-3000mm
Working table distance: 80mm
Number of milling heads 2 sets: Both ends
Milling angle: 0o ~+45o
Model MU-6S Milling head: Made in Taiwan
Power/Speed: 7.5kW, 1440r/min
Milling head diameter:
D= Ø125 – Ø250mm Ø200 Facer unit by default
Milling head speed: 75-505 r/min 6
layer’s by changing the head device

TPPR103 SERIES CNC HYDRAULIC PUNCHING & MARKING MACHINE FOR PLATES

Function:

Web height (mm): 160-2000 mm
Web Thickness (tack): 6-60 mm
Beam width: 150-800 mm (H beam types can be
attached, which have 2 unequal wings and the
wing width of each side can be adjusted within
75-400mm)
The thickness of the wings beam (attachment):
6-60 mm
Length of beams: 4-15 meters
Welding speed in attachment: 360-1200 mm/min
2F welding posture
Attachment speed: 600-3000mm/minute
No-load travel speed: 200-4500 mm/min
Electrical system: A.C inverter and integrated
PLC controller, Touch control screen of Keyence
Main engine power: 9.5 Kw
Power input: AC380/50/4 V/Hz/phase”

BZJ-2000S1 PLUS – H-BEAM VERTICAL ASSEMBLY MACHINE

Function:

Height of beams: 160-2000 mm
(Operators only need to remove the roller
between the two beams when the belly height is
<260mm)
Thickness of girder belly (attachment): 6-60 mm
The width of the beam: 150-800 mm
(can attach H types with 2 unequal wings and
the wing width of each side can be adjusted
within 75-400mm)
The thickness of the wings beam (attachment):
6-60 mm
Length of beams: 4-15 meters
=> Welding speed in the attachment: 360-1200
mm/min
2F welding posture
Attachment speed: 600- 3000mm/minute
No-load travel speed: 200-4500 mm/min
Electrical system: A.C inverter and integrated
PLC controller, Touch control screen of Keyence
Main engine power: 9.5 Kw
Power input: AC380/50/4 V/Hz/phase”

BTMZ-1800-S3 SERIES H-BEAM AUTOMATIC WELDING MACHINE

Function:

“Beam width: 200 ~ 800 mm
Beam height: 1500 mm
Soldering device parts: 2* 50 kg
Maximum beam length: 15 m
Ray amplitude 4000 mm
Rail length (Guest preparation) 18m
Welding movement speed 240-1500 Mm/min
Source (Guest prepares 2 Aptomat 250A) AC380/
50/4 V/Hz/phase
The motor runs 2*750W port
1F welding position
Welding wire diameter (2 back wires): 1.6 Mm
Welding wire diameter (1 front wire): Φ2.4-Φ4.Mm
Engine power: 8.24 Kw
Welded smoking set (2 sets): 2*3 Kw
The machine uses 4 ropes 1.6, 250Kg (Customers
prepare the box, hat and anti-tangle), 2 Coils
4.0,125KG
Weight 2.8 tons

HN0630-S1 TPPR103 SERIES HORIZONTAL H-BEAM AUTOMATIC WELDING MACHINE

Function:

Beam size 75 600 mm
Beam thickness is 8 20mm
Beam thickness 8 20mm
Distance between two rails 4000 mm
Rail length (Guests wishing to use longer rail will
charge an additional cost) Standard is 18m
Welding source 04 sources Megmeet Artsen CM500R
Welding technology with 2 arc,
2 wires, under the medicine layer
Welding speed 0.3 1.5 m/min
No-load speed of 3 m/min
Welding wire (Customers have been wired. conical,
anti- tangled) 04 Ø 1.6 mm, 250Kg wires
Power supply (Guest prepares 1 Aptomat 250A)
AC380/50/4 V/Hz/phase
Power cable, welding cable is standard rail 18m
Welding kit (2 sets) 2*3KW
Welding parts containing 2*50Kg

BTMZ-1800-S3 SERIES H-BEAM AUTOMATIC WELDING MACHINE

Function:

Wing width: (b) 200-1000mm
Minimum belly height: (h) ≥350mm
Minimum belly thickness: (a) ≤50mm
Max wing thickness: (s) 60mm
Straightening speed: 6.3m/min
Suitable voltage: 380V 50Hz 3P
Capacity of the machine: 22kW

SHOT PEENING MACHINE

Function:

Firing a 1.2m wide structure with a height of 1.8m
Number of 10 high-speed bi nozzles
Raw dust collection system and fine dust to avoid
environmental pollution
The length of the whole machine system is 50m
including the body and conveyor belt

TBHD 1250 CNC HIGH SPEED DRILLING MACHINE FOR BEAMS

Function:

Model TSWZ 1250
SCME Size: Width * Height (mm)
+ Max. 1250×60/Min. 150×75
Length (mm) 2000mm
Maximum workpiece weight 15000kg
Thickness of mm 80
Drilling diameter Vertical drilling (mm) Φ12 ~ Φ40
Horizontal drilling (mm): Φ12~ Φ040
Special type drilling includes 3 axes:
Upper – Left – Right
Rotational speed (rpm): 120-560
Spindle motor power (kW): 3 x 4 kW
Overall dimensions (L x W x H) (mm):
4800x3050x3520
Drill head cooling system includes:
Pneumatic + “Drilling spray solution”.
Air pressure (Mpa): 0.6
Motor: X axis servo 4.4kW
Oil pump motor power: 2.2kW

W24-140 ROLL PROFILE BENDING MACHINE

Function:

Pressure limit: 245Mpa
Maximum size: 168 x 4 mm
Minimum bending diameter: 2000mm
Bending speed (m/min): 3.5
Main motor (KW): 22
Size (mm): 2600 * 2600 * 2400
Weight (T): About 13 T

CNC PIPE CUTTING MACHINE BPC6-630X1

Function:

Number of CNC axes :6 axes connected
to each other
Tube details Diameter range: Φ60-Φ630mm
Maximum length: 12000mm
Maximum weight: 3 tons
CNC control system FANGLING
system F6400 (touch screen)
Machining rack 5 sets
Rotary device with 1 set of 3 self-centering pins
AnyPIPE arrangement software
(for Tekla version18.0 – 20)
Gas field 1 gas field
1 plasma cutting torch Hypertherm MAXPRO200
Plasma cutting source 1 set of
LG-200HA plasma cutting source
Rail rack P24, 2 x 12 meters
Mine rail P24, 2 x 12 meters
Motor: Panasonic servo (Japan)
Reducer: Neugart (Germany)
Manual control box: 1 pc

KURMAN KH 1000HR BAND SAW MACHINE

Function:

Maximum cutting capacity (mm):
+ At 0° 600X1000mm
+ At 45° 600 X600mm
Speed (m/p): 15~80
Saw blade:
+ Dimensions (mm): 41X1.3X7000
+ Cleaning: Brush with steel wire and cooling water.
+ Stretch tongue: Hydraulic
Output motor:
+ Saw blade (kw): 7.5
+ Hydraulic (kw): 1.5)
+ Cooling (KW): 0.125
The volume of hydraulic tank: 130L
Cooling water tank volume: 100L
Working conveyor belt: Power supply
Workpiece Clamp: Hydraulic
Packing size (L x W x H) (mm): 4700x2200x2500

COMBINATION PUNCHING MACHINE MODEL: IRO 20

Function:

90 tons Punching force
20mm Cutting plate
140x12mm Cutting corner
45° cutting angle: 50x5mm
Cut 50mm round bar, square
U Cut: 160x65mm
V Cut: 140x140x12mm

ONNER HYDRAULIC DRILL MACHINE
A075-1224

Function:

Tonner Hydraulic Drill Machine A075-1020.5
Made in Korea
Maximum punch: 32 tons
Max diameter punch: 24 mm

ENGINE POWERED ARTICULATING
BOOM LIFT: GENIE 80/60

Function:

Quantity: 3
Working height: 25.80m
Height to floor: 23.80m
Horizontal reach: 18.30m
Loading capacity: 227kg
Power: Diesel engine
Weight: 17,010kg

SAW MACHINE KH 1000HR

Function:

Maximum cutting capacity (mm)
+ At 0° 600X1000mm
+ At 45° 600X600mm
Speed (m/p) 15 – 80
Saw blade:
+ Dimensions (mm): 44X1.3X7000
+ Cleaning: Brush with steel wire and cooling water
+ Tongue tension: hydraulic
Output motor:
+ Saw blade (kw): 7.5
+ Hydraulic (kw): 1.5
+ Cooling (kw): 0.125
Hydraulic tank volume: 130L
Cooling water tank volume: 100L
Working conveyor: Power supply
Workpiece clamp: Hydraulic
Packing size (L X W X H) (mm) 4700x2200x250